Relay 12Channel 10Amp
DIN-Rail Mount Switched Pass Through Relay 12ch 10A /per ch. with scene controller Multi Phase, Multi-Current, Multi voltage. Software Selectable programmable Motor function: Double Throw Dipole Grouping. Work 220/110 VAC, 50-60Hz as well as 1.5-48VDC (Green operated supplied by 24VAC/12mA) Small and elegant with easy labeling space, output status LED indicator, network health, broadcast address button and Momentary channel button. Can be used in any location that require energy saving, intelligent control such as apartment, Villa, Offices, Restaurant, Hotels or factories. *Can be Manually Programmed by any Electrician on site without need for PC. ** (This is an Advanced 2-way module. Changing load status manually reflect and update on all Connected SW & Devices)
Supply
80-230VAC, 50/60Hz 1-3Phase and Pass through 1.5-48VDC. power consumption: 20-30mA
Outputs 12 x Isolated & Separated Switched Pass through outputs rated at 9A each output ch.
Maximum Total Load
100A total load of all channels
Control IO
3 x Advanced RS485 S-BUS serial port links (both train & screw link types)
Upgrade IO
1 x mini USB port (to connect to special programming board)
User Controls
• front panel override switches, Includes ON/OFF/AUTO override switch for each channel
• LED status indicator/channel
• Diagnostic LED+ BROADCAST
Programming
• Manual Ch. Pairing Programming Each Channel to a Button on Wall Panels (e.g. DDP, 6B)
• Advanced Software Configuration & Programming
Compliance
CE Mark Low Voltage
CE Mark EMC
Internal Protection
• Over Load Protection
• Protecting Delay 0-60min
• Startup Delay 0-25 Sec.
• BUS Rv. Polarity Protection
• BUS Short Circuit Protection
Preset and Scenes
12X12 Built in Scenes, & 12X2 Sequence Modes & Logics.
Installation
• 35mm DIN-Rail Mount Ready
• Wall Mount Ready (8P)
SBUS DC Supply
24VDC with flexible tolerance between 12-32VDC. Flexible ability to add power supply as to be needed any where
Supply Terminals
12 each is good for 2 x 2.5mm2 or 1 x 4mm2 max conductor size
Output Terminals
12 each is good for 2 x 2.5mm2 or 1 x 4mm2 max conductor size
Operating Environment
0º to 45ºC ambient temperature 10% to 93% RH
Enclosure & Size
Polycarbonate, DIN-rail (8 Unit)
Dimensions & Weight
W 91mm x L 145mm x H 75mm Packed weight 0.7k