Pima Wireless 2-Way Outdoor Siren SRO743

السعر عند الطلب

Alarm / Tamper Indication
Upon an alarm condition, the siren will be activated for a period defined by the system (Siren Time parameter).
Low Battery Indication
Upon a low battery condition a trouble indication is sent to the panel.
There are 2 types of low battery indications:
1. Radio low battery
2. Speaker low battery
Supervision
Each siren can be defined to be supervised by the panel. The system generates a local fault signal identifying the siren whose signal is not received during a predefined time, followed by a report to the Alarm Receiving Center (if defined).
Cancel Siren Delay
When an entry time starts, the system transmits a pre-alarm signal to the siren.
If the system is disarmed before the entry delay time expires, a cancellation signal is sent to the siren.
If the siren does not receive a cancellation signal within the entry delay time, the siren will be activated.
Siren Self Testing
Once placing all batteries in the battery holders or pressing on the reset switch located on the PCB (with the tamper switch open), the siren performs a functional self-test indicated by a strobe flash and squawk sound.
LED display
The wireless siren has 2 LEDs located on the PCB. These LEDs are enabled when the tamper is open and 10 minutes after the tamper is closed.
Red: Indicates transmission
Yellow: Indicates a low battery
Red and Yellow (3 seconds): Confirms successful enrollment

منتجات ذات صلة