433Mhz AC 220V Relay 1CH Universal

Product Introduction:

1 Working voltage: AC 110V-220V  Load: 10A

2  L Port:  AC 220V Positive;  N Port: AC 220V negative 

CK=normally open, COM=common, CB=normally close

3 Working mode: passive output, output no voltage, commonly used as switch

4 Working Indication: LED D1 light (Signal indicator light) 

5 Signal Receive mode: Learning mode (nearly all the 433mhz transmitter is OK)  

6 Frequency: 433mhz

7 Transmission Distance: 10-30m

8 Working Mode: Support Momentary(Jog) control, Self-lock(Toggle) control and interlock(Latching)  

9 Working Indication: LED D1 light (Signal indicator light) 

10 Size: 67*33*23mm (with shell )

11 Net weight: 39g

How to set learning module?

1 Learn Remote Signal

Step 1: Supply 220V AC to the module,

Step 2: press the “learning button” once time, the indicator light will flash 1 time,

Step 3: press the RF remote that you need to learn. You will see the LED light flash 3  times, OK.

Now you can use remote to work with module.

2 Clear Remote Signal 

Step 1: Supply 220V to receiver,

Step 2: hold the “learning button”, When you see the LED light flash 3 times,

OK. 

How to change the working mode?

1 Self-lock(Toggle):

Step 1: hold the “learning button”

Step 2: Supply 220V AC to receiver, after you see the LED light flash 3 times, then release the “learning button”.  OK

( Press remote button A, receiver CH1 ON, and Press A again CH1 OFF)

2 Momentary(Jog): 

Step 1: hold the “learning button”

Step 2: Supply 220V AC to receiver, after you see the LED light flash 4 times, then release the “learning button”.  OK

(Keep pressing remote button A, receiver CH1 ON. release button A, then receiver CH1 OFF.)

3 Interlock (Latching): 

Step 1: hold the “learning button”

Step 2: Supply 220V AC to receiver, after you see the LED light flash 2 times, then release the “learning button”.  OK

( Press remote button A, receiver CH1 ON, Press B, receiver CH1 OFF)